transmission of structure-borne vibration is effectively repressed by a special rubber in the crossover area. The oscillation elements can be used for ceilings and walls.

and a wide variety of other joints, cavities and penetrations. Especially handy for narrow sealing areas (e.g. renovation work). For sealing, damping and insulating. Disposable gloves are included.

battening. Hard base In critical areas ensure that a hard base is provided. Attaching wind seals Attach the membranes to the underlying construction in the overlap area using staples. Be certain to use [...] are fastened as tension-free and with as few creases as possible, suction and load effects on the areas of adhesion and connection can be avoided. This helps to avoid the splitting of the membrane at clip [...] the membranes are completely wind-proof, they must be bonded as soon as they have been placed in the area of overlap. The end laps must be bonded as well to ensure wind tightness. Ideally the overlaps are

the inside and windtight on the outside. In order to avoid damage due to moisture in the connection area, windows, joints and wall should be seen as one overarching system. This system must be executed according [...] shells and therefore have very detailed specifications. In order to avoid damage to the installation area, the connection of window and façade in the building shell must be planned and faultlessly executed

other? Find out more Façade Together with the roof, the façade is one of the most highly stressed areas of a house. Find out more Window installation Today’s windows are watertight, which means window

construction with the black side facing outwards. It must be stapled down invisibly in the overlapping area only and then preferably covered with counter battening. Both the horizontal and the vertical overlaps [...] construction. Visible staples that are exposed to the weather, etc. present possible non-windtight areas and should be avoided. We recommend using fasteners that are galvanised at least, or preferably made

layer Details Ampatex LDA 0.02 plus Vapour check for renovation Details Why build an airtight house? Area of application: Interior finishing and air tightness 8 good reasons for an airtight building shell

staples. Avoid creases Lay the vapour retardant avoiding bulges and creases. Hard base In critical areas ensure that a hard base is available. More about this topic Air tightness Find out more Vapour seals

extremely closely at the processing of the membrane in the area of the eave connection, in the area of the gable wall connection and in the area of any possible dormer window. Also, the correct connection