Ampacoll Primax
Solvent-free primer
Ampacoll Primax is a solvent-free primer for Ampacoll butyl and acrylic adhesive strips on porous surfaces.
- Quick dry
- Innovative non-stick screw cap
- Handy square bottle that cannot roll away
- Highly resistant even in unfavourable conditions (moisture, cold)
- Solvent-free and odourless
Ampacoll Primax is a solvent-free primer for Ampacoll butyl and acrylic adhesive strips on porous surfaces, such as masonry, plaster, concrete, bare wood, soft wood fibre board, etc.
Conditions for the twenty-year premium warranty include registering the building object and the Ampack products used. In addition, our products must be used as part of a system. For further details, please see our General Warranty Conditions.
| Article number | Content | Carton content | Content of pallets |
|---|---|---|---|
7640115536433 | 1’000 ml | 6 bottles | 100 cartons |
| Property | Value | Standard |
|---|---|---|
|
Base Material |
Solvent-free acrylic-copolymer | |
|
Color |
first white, then transparent | |
|
Storage |
+5 to +25 °C (keep out of direct sunlight.) | |
|
Setting time |
+20 °C: apprix. 15 min. / 0 °C: approx. 45 min. (on dry surfaces) | |
|
Productiveness |
4-5 m2 / litre (65-85 m on 60 mm width, depending on surface) | |
|
Operating temperature for product |
-10°C to +45 °C | |
|
Temperature resistance |
–40°C to +90 °C | |
|
Operating temperature underground |
-10°C to +45 °C |
Technical data sheets
|
Technical data sheet: Ampacoll Primax | Technical data sheet: Ampacoll Primax, solvent-free primer |
Safety data sheets
|
|
Safety data sheet: Ampacoll Primax | Safety data sheet: Ampacoll Primax, solvent-free primer |
Product photos
|
Product photo: Ampacoll Primax | Product photo: Ampacoll Primax, solvent-free primer |
Surfaces/materials to be bonded
Ampacoll Primax is a solvent-free primer for Ampacoll butyl and acrylic adhesive strips on porous surfaces, such as masonry, plaster, concrete, bare wood, soft wood fibre board, etc.
Preparation
Surfaces, connections and materials to be bonded must be clean and dry and free of dust and grease. The surfaces must also be structurally sound. Remove any concrete and cement residue.
Application
Evenly apply a strip of primer which is as wide as the adhesive tape to the surface. Protect primed surfaces from dust and moisture, etc. Allow the primer to dry. Depending on the temperature and surface, this usually takes between 15 and 45 minutes on a dry surface and in normal humidity conditions If humidity is higher and/or temperatures are lower, the curing time may increase. The primer is completely dry when fingerprints can no longer be seen or are barely visible. The primer remains tacky.
Cleaning
Splashes must be removed immediately. Mask and protect adjacent surfaces. Remove primer remnants every now and then to prevent nozzle from clogging.
Safety instructions
Please also read the safety datasheet
