Ampacoll UV
UV-resistant acrylic adhesive tape, wind-proof
Single-sided adhesive tape with applied solvent-free, modified acrylate adhesive and diagonal inlay.
- Withstands UV
- Moisture-resistant, for outdoor use
- Dimensionally stable
- Completely black – no overprint
Single-sided adhesive tape with applied solvent-free, modified acrylate adhesive and diagonal inlay. Pull-off liner made of silicon paper. Optimum solution for taping Ampatop F black.
| Article number | Roll dimensions | Carton content |
|---|---|---|
7640115533586 | 25 m × 60 mm × 0,33 mm | 10 rolls = 250 m |
| Property | Value | Standard |
|---|---|---|
|
Storage |
cool and dry | |
|
Durability |
> 20 years | |
|
Operating temperature for product |
above - 5 °C | |
|
Temperature resistance |
-40 to +80 °C | |
|
Outdoor weathering |
3 months (before installation of the façade cladding) | |
|
UV stability |
> 10 years |
Technical data sheets
|
Technical data sheet: Ampacoll UV | Technical data sheet: Ampacoll UV, UV stable acrylic adhesive tape, windtight |
Product photos
|
Product photo: Ampacoll UV | Product photo: Ampacoll UV, UV stable acrylic adhesive tape, windtight |
Application photos
|
|
Application photo: Ampacoll UV | Application photo: Ampacoll UV, UV stable acrylic adhesive tape, windtight |
|
|
Application photo: Ampacoll UV | Application photo: Ampacoll UV, UV stable acrylic adhesive tape, windtight |
|
|
Application photo: Ampacoll UV | Application photo: Ampacoll UV, UV stable acrylic adhesive tape, windtight |
Sticking overlapping materials
Clean the surfaces and / or base to be stuck as necessary. Cut the Ampacoll UV to the desired length and position it centrally over the overlap. Rubbing the adhesive tape firmly is essential for ensuring longterm adhesion.
Adhesion of penetrations
When masking penetrations such as outlet vents, beam ends etc., place the Ampacoll INT overlapping onto the penetration
and rub to fix firmly.
Special instructions
For the adhesive tape to function, counter battening is necessary to safeguard subsequent work and to avoid possible weather damage (e.g. wind suction and pressure). We recommend that the façades are covered as quickly as possible. At any rate, the surfacing must be in place no later than four months after. The width of the joint can be up to 3 cm. The individual façade surfacing elements must be twice as wide.
