Ampacoll Easy
Linerless adhesive tape made of special paper
Paper-based acrylic adhesive tape.
- Linerless, even in production: no waste
- Fast to apply
- Highly adhesive
- No waste: lower risk of accidents
- Can be torn by hand: no knife necessary
Paper-based acrylic adhesive tape for airtight sealing of overlaps and joints on smooth surfaces when working dry indoors with membranes or panel-like building materials.
Einsatzbereich
Paper-based acrylic adhesive tape for airtight sealing of overlaps and joints on smooth surfaces when working dry indoors with membranes or panel-like building materials. Thanks to the special membrane, it can be applied directly from the roll without having to peel off a liner.
Conditions for the twenty-year premium warranty include registering the building object and the Ampack products used. In addition, our products must be used as part of a system. For further details, please see our General Warranty Conditions.
| Article number | Description | Roll dimensions | Box contents |
|---|---|---|---|
7640442091490 | Ampacoll Easy | 40 m × 60 mm | 10 rolls = 400 m |
| Property | Value | Standard |
|---|---|---|
|
Storage |
cool and dry | |
|
Durability |
> 20 years | |
|
Operating temperature for product |
from + 5 °C | |
|
Temperature resistance |
– 40 °C to + 100 °C |
Technical data sheets
|
Technical data sheet: Ampacoll Easy | Technical data sheet: Ampacoll Easy, linerless adhesive tape made of special paper |
Product photos
|
Product photo: Ampacoll Easy | Product photo: Ampacoll Easy, linerless adhesive tape made of special paper |
Application photos
|
|
Application photo: Ampacoll Easy | Application photo: Ampacoll Easy, linerless adhesive tape made of special paper |
|
|
Application photo: Ampacoll Easy | Application photo: Ampacoll Easy, linerless adhesive tape made of special paper |
Ampacoll Easy
The surfaces to be bonded must be clean, dry and free of dust and grease. The ambient temperature, the surface temperature and the temperature of the adhesive tape must correspond to the indicated processing temperature. Installed membranes should be stress-free and even. The adhesive tape must be applied stress-free following the uneven surface of the substrate and pressed on firmly.
For panel joints, apply pressure using a pressure roller. No water may accumulate on bonded areas and they must not be exposed to prolonged mechanical stress. Not suitable for use in rooms with high moisture loads, such as saunas, swimming pools, spa areas, large kitchens, etc.
If the adhesive tape is covered by itself (e.g. when two strips of tape cross each other), the end of the upper tape must be guided ≥ 3 cm above the lower tape.
